Adop prepare failed

[big]

Hi,
On R12.2.4, DB 11.2.0.4 on Aix, Adop prepare fails with:

[UNEXPECTED]Error 1 occurred while Executing txkADOPValidation script
[ERROR]: OHS Configuration Files Have Not Been Instantiated From The Latest AutoConfig Templates."  


I found this(Doc ID 2368793.1) and 2437111.1.

Both suggest to edit CONTEXT_FILE and admin.conf to have the same  Listen port in them.

My problem is that, these two files have correct  and same port number for:
Listen %s_ohs_adminport%
PortDescription %s_ohs_adminport% "OHS Administrator port"
 in admin.conf and s_ohs_adminport in CONTEXT_FILE.

Do have any other suggestion?

Thanks and regards.

[ErmanArslansOracleBlog]

It seems like you have a version mismatch between the template and the config files that is supposed to be generated from that template..

What are the detailed errors?

Did you check the following MOS NOTE ->

Oracle E-Business Suite Release 12.2: Validations Performed By the adop Online Patching Utility (Doc ID 1678355.1)
6. Check if instantiate instructions in the readme have been followed correctly

That node suggest following corrective action ->

Corrective Action: Refer to My Oracle Support Knowledge Document 1617461.1 to apply the latest AD and TXK release update packs.

As I already requested the detailed errors, we need to check the exact files that are causing this..

This error may be the same as the one given in the following MOS Note:

"[ERROR]: OHS Configuration Files Have Not Been Instantiated From The Latest AutoConfig Templates." When running fs_clone (Doc ID 2368793.1)

Note that, it is not the config that is problematic, it is the file versions! So in the note above, you get the config file from the template and you manually edit the template to make the template and the config file be sync in terms of version.. I hope you understand what I mean..

[big]

Hi,
Thank you.
I followed 2368793.1 and copied template and modified it manually and renamed it admin.config on PATCH and RUN. Then autoconfig.

Was it the correct action?

And ran adop always the same error.

adop_prepare_error.txt 


Regards.

[ErmanArslansOracleBlog]

You did all the things documented in note "[ERROR]: OHS Configuration Files Have Not Been Instantiated From The Latest AutoConfig Templates." When running fs_clone (Doc ID 2368793.1)?

So then your template version is also old..
Check the $FND_TOP/admin/template/admin_conf_FMW.tmp file and see the version written there..

If the template is also old, then as I already recommended, apply the latest AD and TXK release update packs. -- MOS Doc : 1617461.1

[big]

Hi,
In ADOPValidations_detailed.log we have:
 ================================
  ERROR: File versions mismatch.
  ================================

  Template File: /u01/appl_top/dev/fs2/EBSapps/appl/fnd/12.0.0/admin/template/ssl_conf_FMW.tmp 120.5.12020000.2
 Target File: /u01/appl_top/dev/fs2/FMW_Home/webtier/instances/EBS_web_dev_OHS1/config/OHS/EBS_web_dev/ssl.conf  120.5.12020000.3

  Template File: /u01/appl_top/dev/fs2/EBSapps/appl/fnd/12.0.0/admin/template/admin_conf_FMW.tmp 120.1.12020000.2
 Target File: /u01/appl_top/dev/fs2/FMW_Home/webtier/instances/EBS_web_dev_OHS1/config/OHS/EBS_web_dev/admin.conf  120.1.12020000.2
================================
 ERROR: Oracle HTTP service configuration file version does not match corresponding AutoConfig template file.

Then we see that admin_conf_FMW.tmp 120.1.12020000.2 and admin.conf  120.1.12020000.2, then why mismatch? They are the same version.
As said in 2368793.1 I replaced admin.conf with admin_conf_FMW.tmp,(rename admin_conf_FMW.tmp to admin.conf) and edited and changed:
Change the following lines in my new admin.conf file:

FROM
Listen %s_ohs_adminport%
PortDescription %s_ohs_adminport% "OHS Administrator port"


TO
Listen xxxxx
PortDescription xxxxx "OHS Administrator port"

Ran autoconfig on RUN and then adop phase=prepare which failed with the same errors (as above)in ADOPValidations_detailed.log.

adop_prepare_error_2.txt

I cannot apply the latest AD and TXK release because we should keep DEV at the same release of AD and TXK of our other systems.

Thanks for help.

[ErmanArslansOracleBlog]

We still see version mismatch in the log.
What about mod_wl_ohs.conf ? Is the version of that file same as the its template?
The ssl.conf file is also problematic.. Template version 120.5.12020000.2, target file version 120.5.12020000.3..

[big]

Hi,
Thank you.

strings mod_wl_ohs.conf | grep '$Header'

# $Header: mod_wl_ohs_conf_FMW.tmp 120.7.12020000.6 2014/05/09 11:03:18 mmanku ship $



 strings $FND_TOP/admin/template/mod_wl_ohs_conf_FMW.tmp | grep '$Header'


# $Header: mod_wl_ohs_conf_FMW.tmp 120.7.12020000.6 2014/05/09 11:03:18 mmanku ship $

Regards.

[ErmanArslansOracleBlog]

No need.
This is not a binary file . This is a text file.
Open it with a text edior such as vi and there you will see the version

[big]

Hi,
Thank you.

The version of mod_wl_ohs_conf_FMW.tmp 120.7.12020000.6 2014/05/09 11:03:18 mmanku ship $

And the version of mod_wl_ohs.conf is also 120.7.12020000.6 2014/05/09 11:03:18 mmanku ship $

What can we conclude?

Does it suggest a workaround?

Regards.

[ErmanArslansOracleBlog]

The ssl.conf file is also problematic.. Template version 120.5.12020000.2, target file version 120.5.12020000.3..
Do the same trick that you did for admin conf for the ssl conf and retry.

[big]

Thank you.
Should we replace ssl.conf and admin.conf on PATCH fs also?

Should autoconfig be run on PATCH also?

Regards.

[ErmanArslansOracleBlog]

Replace in the patch fs as well.
Then retry the failing operation.

[big]

Thank you.

I will do the operation on moday.



Regards.

[big]

Hi,

I did it:
replace admin.conf and ssl.conf by their template on RUN and PATCH fs,and modify as should.

Ran autoconfig on RUN and PATCH.

Start application.

Ran adop  phase = prepare.

Continued with other pahses.

It worked fine.

Thank you very much Erman.

Have a nice they.

Regards.

[ErmanArslansOracleBlog]

Good :)